Dimensions in detail: from length to boot capacity (2025)
The new Audi A1 Sportback 2025 measures 4,029 mm in length, 1,740 mm in width and 1,440 mm in height. The wheelbase is 2,555 mm. The ground clearance is millimetres. This refers to the distance between the lowest point under the vehicle and the ground surface.
Exterior dimensions
| Length | 4,029 mm |
| Width (excluding mirrors) | 1,740 mm |
| Width (including mirrors) | 1,940 mm |
| Height | 1,440 mm |
| Wheelbase | 2,555 mm |
| Front track | 1,523 mm |
| Rear track | 1,505 mm |
| Front overhang | 788 mm |
| Rear overhang | 678 mm |
| Turning circle | 10.6 m |
| Front tires | 185/65 R15–215/45 R17 |
| Rear tires | 185/65 R15–215/45 R17 |
Differences between versions
The dimensions of the Audi A1 Sportback 2025 vary depending on the version. Below you will find the specific technical specifications.
| Fuel type | Version |
|---|---|
| Petrol | Dimensions A1 Sportback 25 TFSI 95 hp |
| Petrol | Dimensions A1 Sportback 25 TFSI 95 hp MT |
| Petrol | Dimensions A1 Sportback 30 TFSI 110 hp MT |
| Petrol | Dimensions A1 Sportback 30 TFSI 110 hp |
| Petrol | Dimensions A1 Sportback 30 TFSI 116 hp MT |
| Petrol | Dimensions A1 Sportback 30 TFSI 116 hp |
| Petrol | Dimensions A1 Sportback 35 TFSI 150 hp |
| Petrol | Dimensions A1 Sportback 40 TFSI 207 hp |
More information
Comparison of Audi model dimensions
Below is a comparison of the dimensions of the A1 Sportback with other Audi models in the same segment, as well as with slightly larger and smaller models available in 2025.
| Model | Length in mm | Width in mm | Height in mm | Boot in litres |
|---|---|---|---|---|
| Audi A1 Sportback | 4,029 | 1,740 | 1,440 | / |
| Audi A1 Allstreet | 4,046 | 1,756 | 1,459 | 335 |
Frequently Asked Questions
What are the dimensions of the new Audi A1 Sportback?
The Audi A1 Sportback measures 4,029 mm in length, 1,740 mm in width, and 1,440 mm in height. The wheelbase measures 2,555 mm.
What is the turning circle of the Audi A1 Sportback?
The Audi A1 Sportback has a turning circle of 10.6 meters. This is the minimum space required to make a full 360-degree turn.
