Dimensions in detail: from length to boot capacity (2025)
The new Cupra Terramar 2025 measures 4,519 mm in length, 1,869 mm in width and 1,584 mm in height. The wheelbase is 2,681 mm. The boot has a capacity of 400 litres. The ground clearance is millimetres. This refers to the distance between the lowest point under the vehicle and the ground surface.
Exterior dimensions
| Length | 4,519 mm |
| Width (excluding mirrors) | 1,869 mm |
| Width (including mirrors) | 2,087 mm |
| Height | 1,584 mm |
| Wheelbase | 2,681 mm |
| Front track | 1,590 mm |
| Rear track | 1,580 mm |
| Front overhang | 936 mm |
| Rear overhang | 902 mm |
| Turning circle | 11.5 m |
| Front tires | 235/55 R18–255/45 R19 |
| Rear tires | 235/55 R18–255/45 R19 |
Interior dimensions and boot volume
| Front headroom | 1,055 mm |
| Rear headroom | 977 mm |
| Boot volume | 400 litres |
Differences between versions
The dimensions of the Cupra Terramar 2025 vary depending on the version. Below you will find the specific technical specifications.
| Fuel type | Version |
|---|---|
| Plug-in hybrid | Dimensions Terramar 1.5 TSI eHybrid 204 hp |
| Plug-in hybrid | Dimensions Terramar 1.5 TSI eHybrid 272 hp |
More information
Comparison of Cupra model dimensions
Below is a comparison of the dimensions of the Terramar with other Cupra models in the same segment, as well as with slightly larger and smaller models available in 2025.
| Model | Length in mm | Width in mm | Height in mm | Boot in litres |
|---|---|---|---|---|
| Cupra Formentor | 4,451 | 1,839 | 1,520 | 420 |
| Cupra Terramar | 4,519 | 1,869 | 1,584 | 400 |
| Cupra Tavascan | 4,644 | 1,861 | 1,597 | / |
Frequently Asked Questions
What are the dimensions of the new Cupra Terramar?
The Cupra Terramar measures 4,519 mm in length, 1,869 mm in width, and 1,584 mm in height. The wheelbase measures 2,681 mm.
What is the boot capacity of the Cupra Terramar?
The boot offers 400 litres of space.
What is the turning circle of the Cupra Terramar?
The Cupra Terramar has a turning circle of 11.5 meters. This is the minimum space required to make a full 360-degree turn.
